Cleaning Chemicals

Can I use your chemicals in my personal machine? (E.g. Electrolux, Big Green Clean Machine or Kirby)

Absolutely. Our chemicals are safe for machine use or manual use.

Can I use other chemicals in your machine?

No. As we do not know what the chemical is, chances are it will damage the machine. This is part of the reason why all rentals go with a free chemical.

How many square meters does a bottle of carpet cleaner cover?

Normally we work on around 60 square meters. This is obviously dependant on the state of the carpets as well as the type of carpet. Some carpets are far more absorbent than others. These factors can either increase or decrease the area and will be up to the customer to judge.

The Carpet Cleaner, as a general rule, is enough to clean a house with 3 bedrooms and a dining room area.

Are these chemicals safe for my children/animals?

Yes. All chemicals are produced to strict SABS standards and are ISO9002 approved. If ingestion occurs follow the recommendations on the back label of the chemical. Chemicals are not toxic or life threatening.

Can Stain Remover/ High Traffic/ Odour Eliminator be put into the machine?

Placing them in the machine will not damage the machine. However, it will dilute the chemicals. The chemicals and their dilutions were calibrated to be used straight onto the problem area thus ensuring that results are achieved without unnecessary time wastage.

How do I use the chemicals?

Carpet Cleaner:

75ml mixed into the white bucket at the front of the machine or approximately 8 litres of warm water. To be used in conjunction with our machines or by hand. If used by hand they must put detergent on affected area wait for it to dry to white powder then vacuum up.

High Traffic / Stain:

Both of these are pre spotters. Using a clean cloth or sponge soak with the chemical then apply directly to the stain / high traffic area. Leave for approximately 5 minutes then go over the area with the machine to ensure all of the chemical is extracted. Warn the customer not to leave the stain remover on the carpet for too long as it may remove the carpets colour.

Odour Eliminator:

After cleaning spray in affected area and leave to work. The anti bacterial agent attached itself to the odour molecules and destroys the smell at its source. Can be used in fridges, for pet smells, shoes etc.

Upholstery Cleaner:

Used in the same way as carpet cleaner, 75ml into approximately 8 litres of water. If the customer wants to use it by hand then apply the chemical to the affected area. Allow to dry to white powder then vacuum up.

Used in the same way as carpet cleaner, 75ml into approximately 8 litres of water. If the customer wants to use it by hand then apply the chemical to the affected area. Allow to dry to white powder then vacuum up.

75ml into approximately 3 litres of water. Concentration can be adjusted according to the customer’s requirements. Can be used with either the FloorMac or with a mop.

Spray and Buff Polish:

Clean surface before use. Ensure the floor is dry. Spray polish onto the floor then buff with either the FloorMac or with a mop or damp cloth.

Laminate Cleaner:

75ml into 3 litres of water. Concentration can be adjusted according to the customer’s requirements. Can be used with either the FloorMac or with a mop.